Light switch surround/finger plate. Decorative and hygienic, wipe clean with a soft cloth.
Manufactured from 3mm Perspex acrylic in a wide range of colours and sparkles with smooth flat polished edges and corners.
Supplied in a choice of 19 colours. All glitters are double sided and encapsulated – with a smooth surface finish!
These square trims are 135mm x 135mm and the centre hole is 80mm x 80mm, so with any standard light switch plate give an approximate 25mm border of colour all round. This will enhance any room and save on messy finger marks close to the switch. Being acrylic they are easy to wipe clean.
These covers are easily fitted by removing the two screws and fitting diagonally over the switch plate. The centre hole is big enough to manoeuvre over the switch without the need to un-wire it. We recommend the you turn off the electricity at the fuse box prior to fitting. If you are at all unsure, the installation should be carried out by a competent person/electrician. Once in place the screws need to be tightened whilst ensuring the plate is sitting square. You must also bear in mind that the plate is made from 3mm thick Perspex so you must make sure that the screws you have are long enough to allow for this thickness.
We have a wide range of these trims in our store for single and double sockets.
135mm x 135mm and the centre hole is 80mm x 80mm (so with any standard switch plate give an approximate 25mm border).
Images are for reference only and colours may vary due to monitor settings. The light switch is not included and is for reference only.